ISP1907 series - Built-in Antenna Bluetooth 5.1 Direction Finding Modules
Long Range and Direction Finding Multiprotocol Module Suitable for BLE / Thread / Zigbee / ANT+ / NFC applications with MCU and Antenna
- Single mode Bluetooth 5.1 long range direction finding stack
- Thread, Zigbee, ANT+ stack available
- 2.4GHz low energy RF transceiver from nRF52 Nordic Semiconductor family
- 32-bit ARM Cortex M4 CPU
- Many analog and digital IOs including ADC, SPI, UART, PDM, I2C
- Fully integrated RF matching and Antenna
- Integrated Radio 32 MHz & Synchro 32kHZ crystal clocks
- DC/DC converter with integrated inductor
- Single 1.7 to 3.6V supply
- Pin compatibility with full iSP15 / iSP18 / iSP19 series
8.0 x 8.0 x 1.0 mm
Module Variants
This last generation BLE module by InsightSIP will be deployed in 2 variants to support standard or baseline applications requiring Bluetooth 5.1 standard for Long Range and Direction Finding connectivity. At 8 x 8 x 1 mm, ISP1907 series provide huge computing capability coupled with best-in-class battery life, with power consumption around 20-50% lower than previous generations of technology, making this Bluetooth Low Energy / BLE module a ready to use solution for most of IOT applications.
Fully qualified stacks for nRF52 are implemented in the S112 SoftDevices and allow for multiprotocol capabilities including Bluetooth 5, Bluetooth mesh, Thread, Zigbee, 802.15.4, ANT and 2.4 GHz proprietary stacks.
ISP1907-LL
- 192 kB Flash & 24 kB SRAM
- 13 Configurable GPIOs including 3 ADCs
- +4 dBm output power
ISP1907-HT
- NFC-A Tag for OOB pairing
- ARM Cortex M4F Floating Point processor
- 512kB Flash & 128 kB SRAM
- 30 Configurable GPIOs including 8 ADCs
- USB interface
- +8dBm output power
Development Tools
In order to assist clients in developing their Bluetooth Smart solutions based on the ISP1907, Insight SIP offers Test Boards, proposed as stand alone PCBs, or included in Evaluation Boards which provide full hardware and software development environment. Used as stand alone solution, Test Boards also offer test points for all IOs and can be used in conjunction with Nordic Development kits and external J-Link programmers.
Evaluation Board
Contents
- One Interface Board with integrated J-Link OB JTAG/SWD Emulator
- One Test Board of chosen variant
See above for module variant description - Cables
Ordering information
- ISP1907-LL-EB
- ISP1907-HT-EB
Test Board
Contents
- One Test board of the chosen variant
See above for module variant description
Ordering information
- ISP1907-LL-TB
- ISP1907-HT-TB
AoA Demo Kit
Contents
- One Anchor Board with 3D phase array antenna
- One Tag Boards with sensors
- Cables
- Anchor and Tag related firmware
- nRFConnect DirectionFinding viewer option
Ordering information
- ISP1907-AOA-DK